Sand Dust Test Chamber IEC 60529 Dustproof Lab Environmental Dust Test Chamber
SANWOOD Sand Dust Test chamber is used to test the working ability of the specimen under the condition of free setting dust and no obvious air flow, or place in blast air and large sand dust outdoor site, and other similar site conditions. It is mainly applied in lighting, electrical, electronic, vehicles, motorcycles and other products, outer shell with sealing property
Sand Dust Test chamber Test Method Meet standards:
1. GB2423.37-2006
2. IEC 60068-2-68-1994
3. GB4208-2008/IEC60529:2001 shell entrench level
4. GJB150.12-2009 dust test method(dustproof test)
5. GB7000-1-2007 chapter 9 requirement for shell entrench test
6. GB10485 dustproof test method and equivalent JIS ,DIN,MIL test standard
Sand Dust Test chamber features:
1. Control cabinet and test chamber are installed together
2. Test chamber inner shell is funnel type, shaking fan help recycle the dust
3. Special dust collector
4. Use flake radiating heat tube P.I.D. control heat to reach the temperature balance
5. Use high speed specialized fan to blow the test dust to test space
6. Use vibration motor to shake and recycle the dust to dust collector from the inner chamber wall
7. RS-232 communication interface, could be used for monitoring and remote control the system, record the test data
8. Sanwood controller, LCD touch screen.
Sand Dust Test chamber Technical Specifications:
| Model | SM-SC-500 |
| Internal volume | 512 L |
| Inner dimension | 800×800×800(mm) W×H×D |
| External dimensions | 1450×1700×1000(mm) W×H×D |
| Weight | 360 kg |
| Specifications | Mesh size: standard 75u Dust amount: 2 ~4 kg/m2 |
| Structure | Inner material: 304# stainless steel 1.2mm thick Outer material: cold-rolled steel plate 1.2mm thick The inner shell of the box is funnel-shaped, and the dust-shaking motor assists in the recovery of dust Special dust collector |
| Controller | LCD touch screen temperature controller |
| Temperature sensor | PT-100 sensor |
| Standard configurations | with dust drying device, bibrator, sample holder, observation window in the chamber door |
| Heating system | Scaly radiating heating tube P.I.D control heating to achieve temperature balance |
| Dust blowing method | Using a special high-speed blower to blow the test dust into the test space |
| Dust shaking method | Vibration motor is used to shake off the dust attached to the inner wall of the machine and collect it into the dust collector |
| Power supply | Standard: AC220V ± 10% single-phase 50Hz/60Hz |
Product Catalog:
Dust Test Chamber.pdf
