Realize 95℃ 95% High Temperature And High Humidity Environment
Temperature Humidity Test Chamber for Environmental Test
Constant Temperature And Humidity Test Chamber Basic introduction:
Sanwood temperature and humidity test chamber simulating product under the condition of temperature and humidity combination (high and low temperature operation & storage, temperature cycle, high temperature and high humidity, low temperature and humidity and condensation test, etc.), check whether the adaptability and characteristics of the product itself have changed.
Test standard comply:
● GB/T5170.2-2008 temperature test equipment
● GB/T5170.5-2008 damp heat test equipment.
● GB/2423.1-2008 (IEC60068-2-1:2007) low temperature test method AB.
● GB/2423.2-2008 (IEC60068-2-2:2007) high temperature test method BA.
● GB2423.3-93 (IEC68-2-3) Test Ca: Constant damp heat test method.
● GB2423.4-93 (IEC68-2-30) Test Db: Alternating damp heat test method.
● GJBl50.3 (MIL-STD-810D) low temperature test method.
Sanwood temperature and humidity test chamber features:
• LED Touch Screen, Sanwood customised controller.
• PID Control of Temperature and Humidity
• Both Temperature and Humidity are Programmable (can have 100pattern, each pattern has 999 segment)
• With Humidity Sensor
• With RS485/232 output to computer
• Window Software
• Remote fault notification(opntional)
• With Viewing Window
• With thermostats (prevent overheat)
• Cable Ports(50mm diameter)
• With Data Storage fuction by USB Flash Memory
• Protection (phase protection, overheat, overcurrent etc)
• Water Tank with level detector
• Adjustable Shelf
• Anti-condensation technology of the workroom .(Optional)
• User friendly three color LED indicator lamp ,easy to read working condition
Sanwood temperature and humidity test chamber technical parameters
| Model | SMC-80-CC | SMC-150-CC | SMC-225-CC | SMC-408-CC | SMC-800-CC | SMC-1000-CC | SMC-1500-CC |
| Temperature | Temperature range | -70℃～180℃(A:0℃～180℃;B:-20℃～180℃；C:-40℃～180℃;D:-70℃～180℃) |
| | Temperature fluctuation | ±0.5℃ |
| | Cooling rate | 180.0℃～25.0℃ Cooling rate 2.0～3.0℃/min 25.0℃～-40.0℃ Cooling rate 1.0～2.0℃/min -40.0℃～-70.0℃ Cooling rate 0.7～1.5℃/min |
| | Heating rate | -70.0℃～180.0℃ Within 60 mins 3.0～5.0℃/min |
| | Temperature uniformity | ±1.5℃ (-40.0℃～100.0℃) |
| | | ±2.0℃ (100.1℃～180.0℃or-40.0℃～-70.0℃) |
| Humidity | Humidity range | 20.0%RH～98.0%RH |
| | Humidity fluctuation | ±1.0% RH |
| | Humidity uniformity | ±2.0％RH |
| Material | Internal material | SUS304 stainless steel(1.2mm) |
| | External material | cold-rolled plate(1.2mm),powder coating |
| | Heat insulation | polyurethane foam(100mm)+glass wool(10mm) |
| | Fan | Centrifugal fan(Impeller Fan) |
| | Refrigeration compressor | hermetic compressor(Tecumseh) |
| | Cooling mode | air cooling or water cooling |
| | Refrigerant | R404A,R23,R508 |
| | Evaporator | finned-tube exchanger |
| | Heater | nickel chrome strip heater |
| | Humidifier | Steam Humidifier |
| Size | Interior size(mm)
W*H*D | 400*500*400 | 500*600*500 | 500*750*600 | 800*850*600 | 1000*1000*800 | 1000*1000*1000 | 1200*1000*1250 |
| | Outer size(mm)
W*H*D | 700*1630*1180 | 700*1670*1275 | 700*1880*1290 | 1000*1950*1400 | 1200*2050*1590 | 1200*2050*1780 | 1400*2050*2030 |
| | Volume(L) | 80L | 150L | 225L | 408L | 800L | 1000L | 1500L |
| | Weight(kg) | 280 | 380 | 450 | 620 | 680 | 840 | 955 |
| Working Temperature | +5 ~ 35℃ |
| Power supply | 220V AC 50/60Hz 22A | 220V AC 50/60Hz 31A | 220V AC 50/60Hz 33A | 380V AC 50/60Hz 17A | 380V AC 50/60Hz 25A | 380V AC 50/60Hz 27A | 380V AC 50/60Hz 50A |
| Controller | Standard: South Korea TEMI-1500 |
