SANWOOD Constant Environmental Chamber
Landing Type Temperature and Humidity Test Chamber for Solar PV Testing
Landing Type Temperature and Humidity Test Chamber Basic introduction:
Landing Type Temperature (& Humidity) Test Chamber simulating product under the condition of temperature and humidity combination (high and low temperature operation & storage, temperature cycle, high temperature and high humidity, low temperature and humidity and condensation test, etc.), check whether the adaptability and characteristics of the product itself have changed.
Landing Type Temperature (& Humidity) Test Chamber Need to meet the requirements of international standard (IEC, JIS, GB, MIL...). in order to achieve International quantum measurement procedures consistency (including test steps, conditions, methods). To avoid different cognitive, and reduce uncertainly factors scope of measurement.
Six advantages of Sanwood Landing Type Temperature and Humidity Test Chamber :
1.Landing Type Temperature and Humidity Chamber Evaporator no frosting under longtime Low temperature and low humidity running.
2.Automatic control system refrigerant demand save electricity above 30%
3.High heat load tested samples test environment
4.realize 85℃ 85%high temperature and high humidity environment.
5.10% 20 ℃ ultra-low temperature range control ability
6.Multi-language selection: Chinese, English, Russian, Korean, Japanese, German multilingual language switching.
| Model | SMC-1000-CC | SMC-1800-CC | SMC-2520-CC | SMC-3600-CC | SMC-5000-CC | SMC-8000-CC |
| Temperature | Temperature control range | -70℃～180℃ (A:0℃～180℃;B:-20℃～180℃；C:-40℃～180℃;D:-70℃～180℃) |
| | Temperature fluctuation | ±0.5℃ |
| | Cooling rate | 180.0℃～25.0℃ Cooling rate 2.0～3.0℃/min 25.0℃～-40.0℃ Cooling rate 1.0～2.0℃/min -40.0℃～-70.0℃ Cooling rate0.7～1.5℃/min |
| | Heating rate | -70.0℃～180.0℃ Within 60 mins 3.0～5.0℃/min |
| | Temperature uniformity | ±1.5℃ (-40.0℃～100.0℃) |
| | | ±2.0℃ (100.1℃～180.0℃or-40.0℃～-70.0℃) |
| Humidity | Humidity control range | 20.0%RH～98.0%RH |
| | Humidity fluctuation | ±1.0% RH |
| | Humidity uniformity | ±2.0％RH |
Material /
components | Internal material | Adopts 1.2mm thickness stainess steel(SUS304) |
| | External material | Adopts 1.2mm thickness Cold rolled steel sheet / powder spraying |
| | Heat insulating material | 100mm thickness polyurethane plate＋10mm thickness mineral wool |
| | Fan | Centrifugal blower |
| | Compressor | Fully-closed/
Semi-closed | Semi-closed | Semi-closed | Semi-close | Semi-closed | Semi-closed |
| | Condenser | Air cooling,
water cooling | Air cooling,
water cooling | Water cooling | Water cooling | Water cooling | Water cooling |
| | Refrigerant | R404A,R23,R508 |
| | Evaporator | Fin - and - Tube Heat Exchanger |
| | Heater | Nickel chromium alloy heating wire |
| | Humidifier | Steam humidifier |
| Size | Interior size(mm)W*H*D | 1000*1000*1000 | 1000*1500*1200 | 1200*1500*1400 | 1200*2000*1500 | 1500*1800*1850 | 2000*2000*2000 |
| | Outer size(mm) W*H*D | 1200*1550*2450 | 1200*2000*2650 | 1400*2000*2850 | 1400*2350*2950 | 1700*2150*3300 | 2300*2450*3600 |
| | Volume(L) | 1000L | 1800L | 2520L | 3600L | 5000L | 8000L |
| Power supply | 380V AC 50/60Hz |
| Controller | Standard: South Korea TEMI-1500TEMI-2700 |
Product Catalog:
Temperature and Humidity Test Chamber .pdf
