
Add to Cart
Water Cooled CE Reliability Thermal Shock Chambers / Rapid Rate Thermal Cycle Chambers
Below are differences between 3-zone and 2-zone thermal shock chamber:
3-zone thermal shock chamber:
three chamber in total: test space, high temp. chamber and low temp. chamber;
Advantage: slight limitation for test sample’s weight, the test sample keep still, this can reduce the impact to samples by moving it, can be used for on-load testing.
Compared with 2-zone type, relatively low failure rate, low cost.
Disadvantage: long conversion time
2-zone thermal shock chamber:
only two chambers: high temp. Chamber and low temp. chamber
Advantage: short conversion time, smaller space needed
Disadvantage: test sample moving. test samples’ size is limited by the basket size
Model | SM-50-3P-A | SM-80-3P-A | SM-100-3P-A | SM-150-3P-A | SM-200-3P-A | SM-300-3P-A | SM-500-3P-A | |
Temperature | Temperature impact range | -70℃~150℃ (A:-45℃~150℃;B:-70℃~150℃) | ||||||
Temperature fluctuation | ±1.0℃ | |||||||
Low temperature precooling time | 25.0℃~-70.0℃ Within 60 mins 1.0~3.0℃/min | |||||||
High temperature preheating time | 25.0℃~200.0℃ Within 60 mins 3.0~7.0℃/min | |||||||
Temperature conversion time | 3S | |||||||
Temperature recovery time | Within 5 mins | Within 10 mins | ||||||
Material / components | Internal material | Stainless steel(SUS304) | ||||||
External material | Cold rolled steel sheet / powder spraying | |||||||
Heat insulating material | 100mm thickness polyurethane plate+10mm thickness mineral wool | |||||||
Fan | Centrifugal blower | |||||||
Compressor | France Tecumseh, Germany Bock, Germany Bitzer | |||||||
Condenser | Air cooling, water cooling | water cooling | ||||||
Refrigerant | R404A,R23,R508 | |||||||
Evaporator | Fin - and - Tube Heat Exchanger | |||||||
Heater | Nickel chromium alloy heating wire | |||||||
Size | Interior size(mm) W*H*D | 350*400 | 400*500 | 500*500 | 500*600 | 650*460 | 960*460 | 960*650 |
Outer size(mm) W*H*D | 1400*1750 | 1450*1850 | 1550*1850 | 1550*2050 | 1700*2000 | 2050*2000 | 2050*2150 | |
Volume(L) | 50L | 80L | 100L | 150L | 200L | 300L | 500L | |
Operating ambient temperature | +5 ~ 35℃ | |||||||
Power supply | 380V AC 50/60Hz | 380V AC 50/60Hz | 380V AC 50/60Hz | 380V AC 50/60Hz | 380V AC 50/60Hz | 380V AC 50/60Hz | 380V AC 50/60Hz | |
Controller | SANWOOD SH5600:Equipped with RS232 port;(7.0 inch controller) USB data export ) |
Product Catalog:
Three-zone Thermal Shock Test Chamber.pdf