SANWOOD 1000L High Low Temperature Chamber
Temperature Cyclic Test Chamber for Electric Electronic Reliability Testing
Temperature Humidity Test Chamber Basic introduction:
Temperature humidity chamber simulating product under the condition of temperature and humidity combination (high and low temperature operation & storage, temperature cycle, high temperature and high humidity, low temperature and humidity and condensation test, etc.), check whether the adaptability and characteristics of the product itself have changed.
Humidity Control:
Humidity control in a small environmental chamber can be especially challenging. SANWOOD expertise in humidity control brings intelligent design that is carefully integrated into the Criterion chambers. The humidity subsystems are designed for reliability, convenience, and performance:
An external steam generator allows expanded range and is easy to maintain.
A separate de-humidification coil improves low humidity control and range.
Wet-bulb humidity sensor is a “primary measurement method” for accuracy. It is also economical, easy to maintain, and reliable because it has no risk of failure due to over-saturation. (Read why analog is preferred over digital.)
Sanwood temperature and humidity test chamber features:
• LED Touch Screen, Sanwood customised controller.
• PID Control of Temperature and Humidity
• Both Temperature and Humidity are Programmable (can have 100pattern, each pattern has 999 segment)
• With Humidity Sensor
• With RS485/232 output to computer
• Window Software
• Remote fault notification(opntional)
• With Viewing Window
• With thermostats (prevent overheat)
• Cable Ports(50mm diameter)
• With Data Storage fuction by USB Flash Memory
• Protection (phase protection, overheat, overcurrent etc)
• Water Tank with level detector
• Adjustable Shelf
• Anti-condensation technology of the workroom .(Optional)
• User friendly three color LED indicator lamp ,easy to read working condition
Sanwood temperature and humidity test chamber technical parameter:
| Model | SMC-1000-CD | | Temp. range | -70°C ～150°C (can be CA: 0~ 180°C; CB -20°C ~ 180°C; CC -40°C~180°C) | | Display resolution | 0.1°C | | Temperature stability | High±0.5°C ,low ±1.0°C | | Temperature uniformity | ≤±2.0°C | | Heating Rate | -70°C ～+180°C, 3.0 ~ 5.0℃/min | | Cooling rate | 180°C ～25°C cooling rate 2.0~3.0℃/min; 25°C ～-40°C cooling rate 1.0~2.0℃/min; -40°C ～-70°C cooling rate 0.7~1.0℃/min; | | Humidity control range | 20%RH ~ 98%RH (Can be customized to 5%RH) | | Interior material | Stainless Steel Plate ( SUS 304) | | Exterior material | A3 plate with power coating. Color can be customized | | Insulation material | Rigid polyurethane Foam and Glass Fiber Wool | | Inner size (WxHxD) mm | 1000x1000x1000 | | External size (WxHxD) mm | 1200x2050x1780 | | Ambient Temp. | +5°C ～+35°C | | Power supply | 380V AC, 50Hz/60Hz 3 phase | | Weight | 880KG | | Sight window size | 450 X 450mm (can be customized) | | Sample holder | 2 pcs | | Fittings | cable port(portΦ100mm) x2 (Size and quantity can be customized) | | Safety device (standard) | No fuse breaker,over pressure,over heat&over current protect,over temp. | | protect, over load protect for blower, dry heat protect | | Control System | Balanced Temperature & Humidity Control (BTHC)System | | Refrigeration system | Air Cooled (Water Cooled is option) | | Hermetic compressor | | Double stage refrigeration system, | | R408 AND R23 (Option: R449A, R508) | | Controller | 5'7-inch LCD Touch Screen panel | | Operation model :Program or fix point running | | Memory capacity :120programs,1200steps, | | All repeat 999 cycles, part repeat 99 cycles | | Note: 1. We reserve the right to change specifications without prior notice 2. Customized sizes and configurations available | |
