Walk In Environmental Test Chamber
ESS Chamber Temperature Humidity Climatic Chamber for Automotive Industries Products
Walk-in Battery Environmental Chamber Product description
The walk-in temperature (and humidity) test chamber is widely used in aerospace, aviation, electronics, automotive, battery and other industries to do electronic heating products, materials, parts, equipment, etc. Accelerated thermal cycle test, alternating thermal test and constant temperature test In addition, high and low temperature routine tests and low temperature storage can also be performed to evaluate the behavior of the sample under given environmental conditions.
Walk-in ESS Chamber Product advantages
1.Walk-In Rapid Temperature Change Test Chamber Can set the temperature variable rate of the different stress screening
2.Walk-In Type Rapid Temperature Change Test Chamber Can perform a rapid temperature change (ESS), condensation test, high temperature and humidity test, temperature and humidity cycling test, etc.
3.Walk In ESS Test Chamber Meet the requirements of stress screening test for electronic equipment
4.Switching temperature and average temperature these two kinds of test methods
5.Can set a variety of stress screening (fast temperature change rate) 5deg C/min, 10deg C/min, 15deg C/min experimental conditions
6.Meet the requirements of stress screening test for electronic equipment MIL-STD-2164, MIL-344A-4-16, MIL-2134A-19, NABMAT-9492, GJB-1032-90, GJB/Z34-5.1.6, IPC-9701....ETC.
7.Can carry out the two test methods, temperature test and average temperature test
8.With aluminum sheet test machine load capacity (non plastic load)
9.Single machine can perform fast temperature change (ESS), condensation test, high temperature and humidity test, temperature and humidity cycling test, etc.
10.Can screen the sample load with a large number
11.Built in two-way USB2.0 portable storage interface (can copy the test curve and load the test program)
12.Complete real-time test curve analysis shows that no time limit
13.Can be integrated with the E management system to monitor the management system
14.Multi-language selection: Chinese, English, Russian, Korean, Japanese, German multilingual language switching
Product accessories
1.Standard equipment
Test product load power supply 3 groups
Each side of the left and right side has a 50mm Pin hole
Pin hole silicone plug 2 PCS
Stainless steel sample holder 2 PCS
20L water storage tank 1 PCS
Pure water filter 1 PCS
Walk-in Environmental Chamber Product Specification:
| Model | SMC-080-CC-WT | SMC-120-CC-WT | SMC-160-CC-WT | SMC-250-CC-WT | SMC-340-CC-WT | SMC-400-CC-WT |
| Temperature | Temperature control range
| -40℃～80℃ |
| Temperature fluctuation | ±0.5℃ |
| Cooling rate | 60.0℃ ~ -40.0℃ Cooling rate 2.5℃/min on average |
| Heating rate | -40.0℃～60.0℃ Heating rate 2.5℃/min on average |
| Temperature uniformity | ±2.0℃ (-40.0℃～80.0℃) |
| ±2.5℃ (-40.0℃～-65.0℃) |
| Humidity | Humidity control range | 20.0%RH～95.0%RH |
| Humidity fluctuation | ±1.5% RH |
| Humidity uniformity | ±3.0％RH |
Material /
components | Internal material | Stainless steel(SUS304) |
| External material | Cold rolled steel sheet / powder spraying |
| Heat insulating material | 100mm thickness polyurethane plate＋10mm thickness mineral wool |
| Fan | Centrifugal blower |
| Compressor | Semi-closed Germany Bock, Germany Bitzer |
| Condenser | Water-cooled |
| Refrigerant | R404A,R23,R508 |
| Evaporator | Fin - and - Tube Heat Exchanger |
| Heater | Nickel chromium alloy heating wire |
| Humidifier | Steam humidifier |
| Size | Interior size(mm)W*H*D | 1970*2100*1970 | 3020*2100*1970 | 4070*2100*1970 | 3020*2100*4070 | 4070*2100*4070 | 5120*2100*4070 |
| Outer size(mm)W*H*D | 2170*2350*3500 | 3220*2350*3500 | 4270*2350*3500 | 4650*2350*4270 | 5720*2350*4270 | 5320*2350*6150 |
| Volume(m³) | 8.0m³ | 12.0m³ | 16.0m³ | 25.0m³ | 34.0m³ | 40.0m³ |
| Power supply | 380V AC 50/60Hz |
| Controller | Standard: SANWOOD SH5600 Option: South Korea TEMI-1500, TEMI-2500, TEMI-2700 |
