Guangdong Sanwood Technology Co.,Ltd
Guangdong Sanwood Technology Co.,Ltd Aim to be the world's Well-known Brand for Environmental Reliability Test Chambers and Battery test chambers
Add to Cart
DustProof Test Equipment IEC60529 Sand Dust Climatic Test Chamber
Dust test chamber, also known as dust test chamber, is based on IEC60529, GB2423.37-89 (test L: dust test method), GB 4208-93 protective bushing level (IP code), GB/T 4942.2-93 (protection of low-voltage electrical appliances Enclosure rating), GB 7000.1-1996, GB 7001-1986 (protective enclosure rating for lamps), DIN40050 and IP5K0. It is mainly used for IP5X and IP6X testing of LED, lamps, automobiles, and electrical enclosures.
Sanwood Sand Dust test chamber structure
1. Cavity material: mirror surface SUS304 stainless steel; cavity internal size: 800x800x800mm;
2. External material of cavity: surface atomized SUS304 stainless steel;
3. Tempered glass observation window.
4. Body insulation filling material: polystyrene foam molding;
5. The circuit system mainly adopts: Schneider relay;
6. Controller: Miki touch screen programming LCD controller
7. Heating system: U-shaped electric heating tube, stainless steel material, power: 2kw;
8. Vacuum device SAP: vacuum pump gas flow rate: 0~6 l/min, 0~2 kpa; vacuum gauge, air filter, centrifugal blower, etc.;
Vibration device: eccentric wheel motor;
9. The diameter of the test hole is 50mm, on the side of the cavity
10. Safety devices: leakage protection, overload fuse protection, fan overheating protection;
Sanwood Sand Dust Test chamber Specifications
| Item | Specification |
| Internal dimension | 800W*800D*800Hmm |
| External dimension | 1450W*1000D*1700H mm |
| Chamber material | SUS304 Stainless steel |
| Specifications of square mesh sieve | Mesh hole 75um, mesh metal wire diameter 50um |
| Talcum powder amount | 2 ~4 kg/ m2 |
| Airflow speed | No more than 2m/s |
| Door | Left open door with tempered glass door |
| Controller | PLC Touch Screen controller, programmable to set as below cycle: a. Blowing dust time (Stop/Blow) m/s b. Cycle time: can be adjusted c. Pre-set test time: 0s ~99m99s |
| Vacuum system | Pressure gauge, air filter, Pressure regulating FRL, connecting pipe, Vacuum pump |
| Fan | Centrifugal fan |
| Safety protection devices | Meter over-temperature function, Phase shortage protection, Power short-circuit protection |
| Power supply | Standard: 220V AC, 50Hz single phase Options for other countries in the world. |
Product Catalog:
Dust Test Chamber.pdf